Automatic Control Industrial Spot Coolers , 8500w Spot Air Cooling Systems

QUICK DETAILS

This product uses a fully automatic control system, imports of fully enclosed rotary compressors, high-efficiency heat exchangers and other advanced components carefully designed and manufactured. It is characterized by the possibility of partial cooling, which solves the problem of difficulty in the overall cooling in a large space. It can also be used for the overall cooling of a small space. It is easy to use, that is, it can be bought urgently without installation. It is safe and reliable. The product is equipped with an automatic diagnostics function. If it works properly, the problems that occur will be displayed on the monitor. The product is made of steel and comes with a pulley. It is light and flexible under the premise of sturdiness and durability.

APPLICATION

1. Hospitals, research institutes, disaster scene rescue.

2. Automobile repair center, manufacturing project cooling.

3. Temporary office space such as reception room, equipment cooling.

4. Factory production workshops, canteens, warehouses, on-site offices.

5. Outdoor activities such as golf driving range, various celebrations, temporary shelters.

Maintenance

These portable ac systems are preferred because of their convenience and efficiency. The condenser fi lter is located at the side of the unit.
1. Slide fi lter up and use a vacuum cleaner to remove the dust from the fi lter.
2. If the fi lter is heavily covered with dust and dirt, warm water and mild soap or neutral detergent may be used to wash the fi lter. Do not use any other chemicals to clean fi lter, as they will likely damage the fi lter.
3. Dry the fi lter in a shaded area before replacing it. Do not operate the unit without the fi lter installed and the fi lter guard in the closed position.
4. To replace the condenser fi lter, place the top of the fi lter in the guide and slide the fi lter up until the bottom of the fi lter clears the frame. Then push the bottom of fi lter into the guide and let fi lter gently fall inside the guide. NOTE: For effective cooling clean the fi lter at least every two weeks.